Ningbo Anyo Import & Export Co., Ltd.
Your best electronic components sourcing and vendor consolidation facilitator
Add to Cart
Horizontal mounted 10mm carbon trimmer potentiometer with vertical adjust
Application:
• Potentiometer as a Voltage Divider
• Audio Control
• Television
• Transducers
Description:
A trimmer potentiometer is a miniature adjustable electrical component. They're designed for "set and forget" applications to "trim" the value of a resistor in order to provide an exact gain, output voltage, or current. Trimmer potentiometers are mounted directly on circuit boards, set with a small screwdriver and designed for few adjustments during operation.
Several different versions of trimpots are available, using different mounting methods (through hole, smd) and adjusting orientations (top, side) as well as single and multi-turn variations.
Difference between single turn and multi turn potentiometer:
The multi-turn used in applications that require more precise settings.
• Single turn
Single turn trimmers/presets are very common and used where a resolution of one turn is sufficient. They are the most cost effective variable resistors available.
• Multi turn
For higher adjustment resolutions, multi-turn trimpots are used. The amount of turns varies between roughly 5-25, but 5, 12 or 25 turns are quite common. They are often constructed using a worm-gear (rotary track) or leadscrew (linear track) mechanism to achieve the high resolution. Because of their more complex construction and manufacturing, they are more costly than single turn preset resistors. The lead screw packages can have a higher power rating because of their increased surface area.
Features:
• Carbon resistive element
• Dustproof enclosure
• Polyester substrate
• Also upon request:
* Wiper positioned at 50% or fully clockwise
* Supplied in magazines for automatic insertion
* Long life model for low cost control potentiometer application
* Self extinguishable plastic UL 94V-0
* Cut track option
* Special tapers
* Mechanical detents
* Low & extra low torque versions
* Special switch option
Electrical specifications
| Range of value | 100Ω≤Rn≤5MΩ (Decad.1.0-2.0-2.2-2.5-4.7-5.0) |
| Tolerance | 100Ω≤Rn≤1MΩ ±20% ; 1MΩ≤Rn≤5MΩ ±30% |
| Max. voltage | 200 VDC(lin) 100VDC(no lin) |
| Rated power | 0.15W(lin) 0.07W(no lin) |
| Taper | lin; log; alog |
| Residual resistance | ≤5‰ Rn(3Ω min) |
| Equivalent noise resistance | ≤3% Rn(3Ω min) |
| Operating temperature | -25°C~70°C |
Others:
Rotation life: After 10,000 rotation, the changes impacted no more than ± (15% R +0.5 Ω ) rotational noise not more than 100 mv
Terminal strength: After welding (350 °C, 3,5 seconds) , the termination of terminal contacts should be good, no loosening of.
Soldering ability: Dip the terminals into tin tank at 260°C±5°C for 2±0.5 seconds, the soldering area should be more than 90%.
Resistance SR code table:
| Resistance | Code |
| 100Ω | 101 |
| 500Ω | 501 |
| 1KΩ | 102 |
| 2KΩ | 202 |
| 3.3KΩ | 332 |
| 4.7KΩ | 472 |
| 5KΩ | 502 |
| 10KΩ | 103 |
| 20KΩ | 203 |
| 22KΩ | 223 |
| 47KΩ | 473 |
| 50KΩ | 503 |
| 100KΩ | 104 |
| 200KΩ | 204 |
| 250KΩ | 254 |
| 500KΩ | 504 |
| 1MΩ | 105 |
| 2MΩ | 205 |
| 2.2MΩ | 225 |
Mounting methods:
Rotors available: