Ningbo Anyo Import & Export Co., Ltd.
Your best electronic components sourcing and vendor consolidation facilitator
Add to Cart
9.5mm Plastic-Coated Metal Shaft Potentiometer Dual Unit Carbon Film
Applications:
• Audio / TV sets
• Automotive sound systems
• Amplifiers/mixers/drum machines/synthesuzers/DJ equipment
• Multimedia sound systems
• portable electronics
Electrical specifications:
| Items | Specification |
| Standard resistance range | 1kΩ~1MΩ |
| Total resistance tolerance | ±10% or ±20% |
| Standard tapers | Linear & audio |
| Ratings power | 0.05W |
| Maximum operating voltage | B Taper :10V AC or 50V AC,Other taper : 5V DC or 25V AC |
| Insulation resistance | 100MΩ min. at DC 250V |
| Dielectric strength | 1 minute at 300V AC |
| Slider noise | 100mV max (before reflow and cycle test) |
| Output signal | Refer to attached drawing |
Mechanical Characteristics:
| Items | Specification |
| Rotational torque(gf.cm) | 50~250gf.cm at 20℃ 500gf.cm max. at -30℃ |
| Push-pull strength | 10Kgf min |
| Total rotational angle | 300°±10° |
| Stopper strength | 3Kgf.cm min |
| Shaft wobble | 0.6*L/20mm p-p max. |
Soldering condition:
| Items | Specification |
| Manual soldering | 96.5 Sn / 3.0 Ag/0.5 Cu solid wire or no-clean rosin cored wire 270℃ max. for 3 seconds |
| Wave soldering | 96.5 Sn / 3.0 Ag / 0.5 Cu solder with no-clean flux 260℃ max. for 5 seconds |
Dimension:
